 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|||||||||||||||
 |
 |
 |
|||||||||||||
 |
 |
 |
 |
||||||||||||
 |
 |
||||||||||||||
 |
|||||||||||||||
 |
 |
 |
|||||||||||||
 |
 |
 |
 |
||||||||||||
 |
 |
||||||||||||||
 |
|||||||||||||||
 |
 |
 |
|||||||||||||
 |
 |
 |
 |
||||||||||||
 |
 |
||||||||||||||
 |
|||||||||||||||
 |
 |
 |
|||||||||||||
 |
 |
 |
 |
||||||||||||
 |
 |
||||||||||||||
 |
|||||||||||||||
 |
 |
 |
|||||||||||||
 |
 |
 |
 |
||||||||||||
 |
 |
||||||||||||||
 |
 |
 |
|||||||||||||
 |
 |
 |
 |
||||||||||||
 |
 |
||||||||||||||
 |
|||||||||||||||
 |
 |
 |
|||||||||||||
 |
 |
 |
 |
||||||||||||
 |
 |
||||||||||||||
 |
|||||||||||||||
 |
 |
 |
|||||||||||||
 |
 |
 |
 |
||||||||||||
 |
 |
||||||||||||||
 |
|||||||||||||||
 |
 |
 |
|||||||||||||
 |
 |
 |
 |
||||||||||||
 |
 |
||||||||||||||
 |
|||||||||||||||
 |
 |
 |
|||||||||||||
 |
|||||||||||||||
 |
|||||||||||||||
 |
|||||||||||||
|
|||||||||||||
|
 |
|
DESIGNED AND ENGINEERED FOR:
|
Retailers
Supermarkets
Factories
Fast
Food Outlets
Office Buildings
Hotels
/ Motels
Schools
Discount
Centers
Warehouses
Hospitals
Nursing Homes |
SPECIFICATION DATA
| MACHINE WEIGHT |
2250 lbs. |
| CHAMBER SIZE |
20 " x 36 " x 44 " |
| BALE SIZE AND WEIGHT |
20 " x 36 " x 24 " Adjustable Height Up to 500 lbs. (corrugated) |
| HYDRAULIC EQUIPMENT |
Cylinder - 4 " bore - 2 1/2 " rod - 32 " stroke Power Unit - 11 GPM - Energy Saving Hi-Lo* Motor - Energy Saving 5 HP - 1800 RPM-TEFC Directional Valve - Solenoid Operated Reservoir Tank - 5 Gallons Operating Pressure @ 2,000 PSI - 29,640 lbs. Maximum Pressure - 3000 PSI Cycle Time - 28 seconds |
| SPECIAL FEATURES |
Adjustable Automatic Bale Size Control Safety Interlock Switch Guide Bar Alignment |
* Baling applications using hydraulic power units require minimal pressure during the initial portion of the work cycle and a high pressure for only a short duration. In these applications, the cylinder can extend at a high rate of speed under low pressure and then slow down to accomplish the final work stage under high pressure to accomplish the Hivolpak uses the Hi-Lo hydraulic power unit which will supply a high volume of oil at a low pressure for rapid cylinder extension and a low volume of oil at high pressure during the actual work portion of the cycle. The Hivolpak Hi-Lo power units are designed to utilize low horsepower motors and therefore offer cost savings over other hydraulic power units which need 3 to 5 times the horsepower to produce like pressures.
COPYRIGHT © 2009 Refuse Systems Corporation ALL RIGHTS RESERVED